TM 5-3825-270-23&P
0133
REMOVAL - Continued
3
4
5
Figure 2. Governor Actuator Removal.
END OF TASK
INSTALLATION
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
1.
Apply sealing compound to bottom mating surface of governor actuator (Figure 3, Item 4).
4
Figure 3. Governor Actuator Installation.
NOTE
Ensure solenoid pin seats on shutoff lever.