TM 5-3825-270-23&P
FIELD MAINTENANCE
GLOW PLUG REPLACEMENT
INITIAL SETUP:
Equipment Condition (cont.)
Tools and Special Tools
Batteries disconnected. (WP 0085)
Tool Kit, General Mechanic's: Automotive
Engine compartment cover removed. (WP 0142)
(WP 0225, Table 1, Item 12)
Wrench, Torque, 40-200 lb-in (6-23 Nm), 3/8 in.
Drive (WP 0225, Table 1, Item 14)
References
Parts Manual (WP 0220) Figure 4046
Equipment Condition
Engine OFF. (TM 5-3825-270-10)
REMOVAL
NOTE
All glow plugs are removed the same way.
1.
Remove four nuts (Figure 1, Item 2), blue wire (Figure 1, Item 1), and cord (Figure 1, Item 3) from glow plugs
(Figure 1, Item 4).
2
1
54
3
Figure 1. Glow Plug Removal.
NOTE
Ensure area around glow plugs is clean and free of debris. Failure to comply may result in
damage to equipment.
2.
Remove glow plug (Figure 1, Item 4) from cylinder head (Figure 1, Item 5).
END OF TASK
