TM 5-3825-270-23&P
0084
REMOVAL - Continued
27
37
38
Figure 8. Battery Box Wiring Removal.
11.
Remove wire harness (Figure 8, Item 38) from water distributor.
END OF TASK
INSTALLATION
NOTE
Perform Steps (1) through (8) for battery box wire harness installation.
Perform Steps (7) through (9) for starter wire harness installation.
Route wiring as noted prior to removal.
Install cable ties and retainers as required.
Install wiring as noted prior to removal to ensure proper installation.
1.
Install wiring harness (Figure 9, Item 38) through opening in control box (Figure 9, Item 27) with fitting (Figure
9, Item 37).
27
37
38
Figure 9. Battery Box Wiring Installation.
2.
Install black wire (Figure 10, Item 30) on negative terminal strip (Figure 10, Item 29) socket 6.