TM 5-3825-270-23&P
FIELD MAINTENANCE
BATTERY BOX WIRING REPLACEMENT
INITIAL SETUP:
References (cont.)
Tools and Special Tools
Parts Manual (WP 0220) Figure 4018
Tool Kit, General Mechanic's: Automotive
Parts Manual (WP 0220) Figure 4037
(WP 0225, Table 1, Item 12)
Equipment Condition
Materials/Parts
Battery box removed. (WP 0083)
Compound, Sealing, Loctite 242 (WP 0224, Table
Access panels removed. (TM 5-3825-270-10)
1, Item 19, 20, 21, 22)
Cable Ties (WP 0224, Table 1, Item 9)
Tags, Identification, White (WP 0224, Table 1, Item
54)
References
Parts Manual (WP 0220) Figure 4009
REMOVAL
NOTE
Tag and mark all wires prior to removal to ensure proper installation.
Remove cable ties and retainers as required.
Perform Steps (1) through (4) for starter wire harness removal.
Perform Steps (3) through (11) for battery box wire harness removal.
Note routing of wiring to ensure proper installation.
1.
Remove nut (Figure 1, Item 5), positive battery cable (Figure 1, Item 1), red wire (Figure 1, Item 2), red wire
(Figure 1, Item 3), and red wire (Figure 1, Item 4) from starter (Figure 1, Item 6).
0084-1