TM 5-3825-270-23&P
0084
INSTALLATION - Continued
31
32
27
33
34
35
29
30
36
Figure 10. Battery Box Wiring Installation.
3.
Install ground wire (Figure 10, Item 33), washer (Figure 10, Item 34), and nut (Figure 10, Item 35) on ground
stud (Figure 10, Item 36) and main control box (Figure 10, Item 27).
4.
Connect clear wire (Figure 10, Item 31) to 15 amp breaker (Figure 10, Item 32).
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
5.
Apply sealant to the threads of six screws (Figure 11, Item 25).