TM 5-3820-276-10-2
0203
Table 3.
PMCS - Grouter - After Drilling Equipment Operation - Continued.
ITEM TO BE
EQUIPMENT
ITEM
CHECKED OR
NOT READY/
NO.
INTERVAL
SERVICED
PROCEDURE
AVAILABLE IF:
CAUTION
Make sure to fill fuel tank at the end of each
day to minimize condensation (water).
Failure to comply may result in damage to
equipment.
Check fuel level (Figure 27, Item 1) and add JP-8/DF2
Fuel level is low. Notify
diesel fuel, if necessary (Volume 1, WP 0038).
maintenance.
1
WWDS00566
Figure 27. Fuel Level.
WARNING
2
After
Hydraulic Oil
Do not allow hot oil or components to touch
your skin. Hot oil or components will burn
your skin. Wear heat-resistant gloves,
goggles, and protective clothing when you
work near hot oil or components. If hot oil
gets on your skin, seek medical aid
immediately. Failure to comply may result in
injury or death to personnel. Seek medical
attention in the event of an injury.
CAUTION
Do not continue to run engine if hydraulic oil
temperature rises above specification.
Failure to comply may result in damage to
equipment.
02/13/2013root(pmcswp)wpno(I20003)