TM 5-3820-276-10-2
0203
Table 3.
PMCS - Grouter - After Drilling Equipment Operation - Continued.
ITEM TO BE
EQUIPMENT
ITEM
CHECKED OR
NOT READY/
NO.
INTERVAL
SERVICED
PROCEDURE
AVAILABLE IF:
1
2
WWDS00526
Figure 29. Engine Oil Level.
WARNING
4
After
Engine Coolant
Do not remove filler cap from a HOT engine
radiator. Sudden release of hot engine
coolant and steam can cause serious burns
and a loss of coolant. Make sure engine is
cool and engine cooling system is fully
depressurized before removing radiator filler
cap. Failure to comply may result in injury or
death to personnel. Seek medical attention
in the event of an injury.
NOTE
If the appropriate mixture of antifreeze is
not used during freezing temperatures,
failure to drain the engine may cause costly
engine damage. Never use water only, as
corrosion inhibitors are required in engine
coolant fluid.
Check engine coolant level in radiator (Figure 30, Item
Coolant level low.
1). Add engine coolant as required (WP 0222).
02/13/2013root(pmcswp)wpno(I20003)