TM 5-3820-276-10-1
0064
PAC SLAVE RECEPTACLE STARTING PROCEDURES - Continued
10.
Check that VOLTS gauge (Figure 6, Item 1) reads between 24 to 28 volts.
1
2
WWDS00381
Figure 6.
PAC Control Panel.
CAUTION
If fault occurs on electronic display, immediately shut off engine and notify maintenance.
Failure to comply may result in damage to equipment.
11.
Check 4 DIGIT MALFUNCTION CODE display (Figure 6, Item 2) for faults.
12.
Disconnect NATO slave cable (Figure 7, Item 2) from slave receptacle (Figure 7, Item 1) on PAC.
1
2
WWDS00380
Figure 7.
NATO Slave Cable Disconnect from PAC.
13.
Install protective cover (Figure 8, Item 2) on slave receptacle (Figure 8, Item 1).