TM 5-3820-276-10-1
OPERATOR MAINTENANCE
SLAVE RECEPTACLE STARTING PROCEDURES - PORTABLE AIR COMPRESSOR (PAC)
INITIAL SETUP:
Tools and Special Tools
References
NATO Slave Cable
(Volume 2, WP 0231, Table 1, Item 46)
Equipment Condition
Personnel Required
Wheels chocked (WP 0015)
Two
PAC SLAVE RECEPTACLE STARTING PROCEDURES
NOTE
In this procedure Water Well Drilling Rig (WWDR) is being shown as an assist vehicle.
1.
With aid of an assistant, move assist vehicle into position beside PAC so slave receptacles are side by side.
2.
Place transmission shift lever (Figure 1, Item 1) of assist vehicle in Neutral.
1
2
WWDS00220
Figure 1.
Positioning of Assist Vehicle.
3.
Pull PARKING BRAKE valve (Figure 1, Item 2) up to set parking brake on assist vehicle.