TM 5-3820-276-10-1
OPERATOR MAINTENANCE
SETUP PROCEDURES - WELDER/GENERATOR
INITIAL SETUP:
Tools and Special Tools
Equipment Condition
Wrench, Adjustable 12-in.
Engine off (WP 0045)
(Volume 2, WP 0231, Table 2, Item 24)
WELD OUTPUT CABLE TO TERMINAL ATTACHMENT
WARNING
The Water Well Drilling System presents numerous falling hazards. Use care when
working on top of equipment. Failure to comply may result in injury or death to
personnel. Seek medical attention in the event of an injury.
Turn off power before connecting or disconnecting weld output terminals. Serious
electrical shock or death by electrocution may result. Failure to comply may result
in injury or death to personnel. Seek medical attention in the event of an injury.
Do not use worn, damaged, undersized, or poorly spliced cables. Serious electrical
shock or death by electrocution may result. Failure to comply may result in injury or
death to personnel. Seek medical attention in the event of an injury.
Failure to properly connect weld cables may cause excessive heat and start a fire.
Failure to comply may result in injury or death to personnel. Seek medical attention
in the event of an injury.
1.
Open the WORK terminal door (Figure 1, Item 1) and ELECTRODE terminal door (Figure 1, Item 2).
0044-1
02/13/2013root(opusualwp)wpno(O20015)