TM 5-3820-276-10-1
0024
STORING DRILL ROD WITH PENDANT - Continued
1
2
3
5
4
WWDS00563
Figure 39. Tophead Separation Operation.
9.
Set and hold TOP SLIDE switch (Figure 39, Item 3) to left position to move tophead (Figure 39, Item 1) back
to center position.
10.
Set and hold PIPE ARM ROTATE switch (Figure 40, Item 2) to up position to rotate automated rod handling
arm (Figure 40, Item 3) toward front of drilling rig.
1
2
4
3
9
5
6
7
8
WWDS00565
Figure 40. Drill Rod Storage Operation.
NOTE
Ensure transfer to storage position is clear and lifting beam is in a position low enough to
allow arm to fully lower to its end of travel.
11.
Set and hold PIPE ARM ELEVATION switch (Figure 40, Item 7) down in LOWER position to lower
automated rod handling arm (Figure 40, Item 3) and drill rod (Figure 40, Item 4).
Set and hold PIPE STORAGE CARTRIDGES DOWN switch (Figure 40, Item 8) to up position to move lifting
12.
beam (Figure 40, Item 6) up until it comes in contact with drill rod (Figure 40, Item 4).
02/13/2013root(opusualwp)wpno(O10010)
