TM 10-4930-236-13&P
4-17. VALVE OPERATING LEVER ASSEMBLY
This task consists of:
a.
Removal
b.
Disassembly
c.
Repair
d.
Assembly
e.
Installation
INITIAL SETUP
Tools Required
General Mechanic Tool Kit (Appendix B, Section III, Item 3)
Materials/Parts Required
Grease "Appendix E, Section II, Item 8)
Dry Cleaning Solvent (Appendix E, Section II, Item 1)
Rags, Wiping (Appendix E, Section II, Item 13)
Lockwashers (4) (Appendix F)
Spring Pin (1) (Appendix F)
Equipment Condition
Pumping Unit Shutdown
General Safety Instructions
WARNING
Do not smoke within 50 feet (15.34 meters) of the Tank and Pump Unit.
Dry cleaning solvent is potentially dangerous to personnel and property.
NOTE
Discard all mandatory replacement parts.
REMOVAL
a.
Loosen nuts (1) to disconnect cables (2) from the adjusting bolts (3).
b.
Remove the nuts (1) and withdraw cables (2) through bushings (4).
c.
Remove screws (5) and lockwashers (6) to remove lever assembly (7) from pumping unit.
4-38
