TM 10-4930-236-13&P
4-15. INTERVEHICLE POWER CABLE
This task consists of:
a.
Removal
b.
Test
c.
Installation
INITIAL SETUP
Tools Required
Multimeter (Appendix B, Section lIl, Item 11)
Materials/Parts Required
None
Equipment Condition
Pumping Unit Shutdown
General Safety Instructions
WARNING
Low voltage can cause injury or death.
REMOVAL
Disconnect power cable (1) from vehicle NATO slave receptacle (2) and junction box receptacle (3).
TESTING
Use multimeter to check both negative and positive sides of the cable connectors. There should be a zero
to 5 ohms resistance reading. If greater than 5 ohms, replace cable.
INSTALLATION
Connect power cable to junction box receptacle (3) and Vehicle NATO slave receptacle (2).
4-35
