TM 10-4630-206-12&P
0014 00
Replace Tank
WARNING
Ensure that the SEP has been thoroughly cleaned with chlorine
solution and rinsed prior to any inspection or service to the interior.
Failure to do so may result in serious illness or death to personnel.
1. Remove all bulkhead fittings as described above.
2. Remove pump as described in WP0019 00 and install in new tank.
3. Remove circuit breaker box as described in WP0015 00 and install in new tank.
4. Remove power cable as described in WP0016 00 and install in new tank.
5. Remove heater element as described in WP0017 00 and install in new tank.
6. Remove float switch as described in WP0018 00 and install in new tank.
7. Remove internal discharge hose and components as described in WP0021 00 and install in new tank.
8. Remove check valve as described in WP0022 00 and install in new tank.
END OF WORK PACKAGE
0014 00-2
