TM 10-4630-206-12&P
0015 00
REPLACE
Replace Circuit Breaker
WARNING
The site power must be disconnected before proceeding further.
Touching a live wire can cause serious injury or death to personnel.
1. Disconnect site power.
2. Open circuit breaker box (9-1-0150-1 and 9-1-0150-2)/control box (9-1-0527).
NOTE
Cut wire ties as necessary to allow for removal of circuit breaker.
3. Remove and tag wires from damaged circuit breaker (1).
4. Remove damaged circuit breaker from panel (2).
5. Place new circuit breaker into position on panel and secure.
6. Install wires, as tagged, onto new circuit breaker.
7. Reconnect site power.
8. Test circuit breakers as detailed above.
1
2
0015 00-4
