TM 10-4630-206-12&P
0015 00
Replace the Circuit Breaker Box (9-1-0150-1 and 9-1-0150-2)/Control Box (9-1-0527)
WARNING
The site power must be disconnected before proceeding further.
Touching a live wire can cause serious injury or death to personnel.
1. Disconnect site power.
2. Open circuit breaker box (9-1-0150-1 and 9-1-0150-2)/control box (9-1-0527).
3. Tag and disconnect all wires (1) passing out of the circuit breaker box (9-1-0150-1 and 9-1-0150-2)/
control box (9-1-0527).
NOTE
Cut wire ties as necessary to allow for removal of circuit breaker box (9-
1-0150-1 and 9-1-0150-2)/control box (9-1-0527).
4. Remove the bolts or screws (2) fastening the circuit breaker box (9-1-0150-1 and 9-1-0150-2)/control
box (9-1-0527) to the SEP tank.
5. Remove circuit breaker box (9-1-0150-1 and 9-1-0150-2)/control box (9-1-0527).
6. Install replacement circuit breaker box (9-1-0150-1 and 9-1-0150-2)/control box (9-1-0527) into
position and secure with fasteners (2).
7. Install wires (1) as tagged onto replacement circuit breaker box (9-1-0150-1 and 9-1-0150-2)/control
box (9-1-0527).
8. Close and latch circuit breaker box door (9-1-0150-1 and 9-1-0150-2)/control box door (9-1-0527)
9. Reconnect site power.
1
2
2
9-1-0150-1 and 9-1-0150-2
0015 00-5
