TM 10-4630-206-12&P
0016 00
REPLACE
Replace the Power Cable
WARNING
The site power must be disconnected before proceeding further.
Touching a live wire can cause serious injury or death to personnel.
1. Tag and disconnect the power cable leads (1) from the main breaker (9-1-0150-1 and 9-1-0150-2) /
terminal board (9-1-0527) (2).
2. Remove conduit (3).
3. Remove power cord from conduit.
4. Install the conduit on the replacement power cable. Leave approximately 12-inches of wire free.
5. Install the replacement power cable with conduit in the breaker box (9-1-0150-1 and 9-1-0150-2) /
control box (9-1-0527).
3
2
1
9-1-0150-1 and 9-1-0150-2
0016 00-3
