TM 10-4320-307-24
2-30
FIELD INSTRUMENT LAYOUT TEST/REPAIR/REPLACE (CONT).
15. Install wires on fuel solenoid valve (21). Remove tags.
16. Install wires on electronic fuel control actuator (22). Remove tags.
17. Position clutch limit switch (23) on control panel (24) and secure using four screws (25).
18. Connect wires to clutch limit switch (23). Remove tags.
19. Position clutch limit switch cover (26) on switch (23) and secure using two screws and washers (27).
20. Install magnetic pickup (28).
21. Install connector on magnetic pickup (28).
22. Install coolant temperature transmitter (29).
23. Install connector on coolant transmitter (29).
24. Install fluid dampener (30) on the discharge pressure line.
25. Install fluid dampener (31) on the suction pressure line.
2-212
