TM 10-4320-307-24
2-31
CONDUIT LAYOUT REPAIR/REPLACE.
This task covers:
a. Removal
b. Repair/Inspection
c. Installation
INITIAL SETUP
Tools
Equipment
Tool kit, general mechanic's (Item 1, Appendix B) Condition
Materials/Parts
Reference
Condition Description
Paragraph
Field instrument layout removed
Nylon straps
2-30
General Safety Instructions
Well ventilated area
REMOVAL:
NOTE
Most of the field instrument layout sensor cable ends
are mounted to brackets. The following procedure
details the steps required to remove the cable ends
from the brackets if required.
1.
Tag and remove wires (1) from associated sensor (2).
2.
Remove locknut (3) securing connector (4) to bracket (5).
3.
Remove wire and cable from bracket (5).
CAUTION
Use care not to damage the underlying conduit or
wires when removing nylon straps.
NOTE
The conduit layout is held in place using nylon straps.
The following procedure details the steps required to
remove the nylon straps.
4.
Using diagonal pliers, cut and remove associated nylon
strap (6).
5.
Remove five bolts (7), lockwashers, and spacers securing
cable bracket (8) to engine.
6.
Remove two bolts, lockwashers, and nuts (9) securing
two brackets to cable bracket (8).
2-114
