TM 10-4320-307-24
2-30
FIELD INSTRUMENT LAYOUT TEST/REPAIR/REPLACE (CONT).
28. Remove connector J3 (28) from junction box JB1 (17).
29. Disconnect coupling (29).
30. Remove four screws (30), lockwashers and nuts (31) securing box (32) to mounting (33)
and remove box.
31. Separate connector, tag and desolder wires from connector.
32. Remove four screws (34) securing cover and gasket (35) to box (32).
33. Tag and remove wires from box (32).
TESTING/REPAIR/INSPECTION:
1.
Test wires and cables for continuity and inspect for broken, burred, damaged, or frayed wiring.
2.
Repair of components is limited to replacement of defective parts.
3.
Inspect for loose or damaged connectors on wires and cables.
2-109
