TM 10-4320-307-24
2-28
WIRING, GAUGES, SWITCHES, AND INDICATORS TEST/REPAIR/REPLACE (CONT).
27. Position BATTERY CHARGE gauge and bracket (52)
on control panel (53) and secure using two nuts (54).
28. Position OIL PRESSURE gauge and bracket (55) on
control panel (53) and secure using two nuts (56).
29. Position ENGINE TEMPERATURE gauge and bracket
(57) on control panel (53) and secure using two nuts
(58).
30. Position ENGINE RPM gauge and bracket (59) on
control panel (53) and secure using two nuts (60).
31. Connect wires to gauges, switches, and indicators and
remove tags.
32. Position SUCTION PRESSURE (61) and DISCHARGE
PRESSURE (62) gauges on control panel and secure
using six screws (63), washers and lockwashers (64),
and nuts (65).
33. Connect plumbing (66) to SUCTION PRESSURE (61)
and DISCHARGE PRESSURE (62) gauges.
2-104
