TM 10-4320-307-24
2-30
FIELD INSTRUMENT LAYOUT TEST/REPAIR/REPLACE (CONT).
9.
Remove connector from coolant temperature transmitter (5).
10.
Unscrew and remove coolant temperature transmitter (5).
11.
Remove connector from magnetic pickup (6).
12.
Unscrew and remove magnetic pickup (6).
13.
Remove two screws and washers (7) securing clutch limit switch cover (8) to switch (9).
14.
Tag and remove wires from clutch limit switch (9).
15.
Remove four screws (10) securing clutch limit switch (9) to control panel (11).
16.
Tag and remove wires from electronic fuel control actuator (12).
17.
Tag and remove wires from fuel solenoid valve (13).
18.
Remove fluid dampener (14) from the suction pressure line.
19.
Remove fluid dampener (15) from the discharge pressure line.
2-107
