TM 5-4320-300-14
5-5. ALTERNATOR ASSEMBLY (CONT)
Location/Item
Action
Remarks
3. Rotor
Carefully slide rotor out of SRE frame.
NOTE
The brushes are spring loaded and will slip out of the brush holders when the rotor is removed.
CLEANING
Wipe all components with a clean dry cloth.
INSPECTION AND REPAIR
4. Pulley
Inspect for cracks and groove wear. Replace a
damaged pulley.
5. Fan
Check for bent or missing fins and mounting
hole wear. Replace if damaged.
6. Terminals
Inspect for cracks, separations, stripped threads,
and other damage. Replace as necessary.
7. Frames
Inspect for cracks, bearing bore wear, distortion,
damaged threads, and other obvious damage. Re-
move any burrs with a fine stone (Military Speci-
fication MIL-S-17243). Replace either frame if
not repairable.
5-10
