TM 5-3825-270-23&P
0216
INSTALLATION - Continued
1
2
3
4
9
8
7
6
5
Figure 10. Cab Control Box Tachometer Installation.
CAUTION
Do not over-tighten nuts on circuit board. Failure to comply will result in damage to equipment.
11.
Install white jumper wire (Figure 10, Item 6) and white wire No. 9 (Figure 10, Item 7) on +24vdc stud (Figure
10, Item 4) with nut (Figure 10, Item 5).
12.
Install two black wires (Figure 10, Item 1) on ground stud (Figure 10, Item 3) with nut (Figure 10, Item 2).
END OF TASK
FOLLOW-ON MAINTENANCE
Install cab control box faceguard. (WP 0205)
END OF TASK
END OF WORK PACKAGE
