TM 5-3825-270-23&P
FIELD MAINTENANCE
LOW TANK LEVEL SWITCH REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
Parts Manual (WP 0220) Figure 4002
(WP 0225, Table 1, Item 12)
Materials/Parts
Locknut (WP 0226, Table 1, Item 56) Qty: 2
Lockwasher (WP 0226, Table 1, Item 59) Qty: 2
REMOVAL
NOTE
Note position of low tank level switch prior to removal to ensure proper installation.
Note position of connectors prior to removal to ensure proper installation.
1.
Disconnect switch harness connector (Figure 1, Item 1) from harness connector (Figure 1, Item 2).
4
3
1
2
5
6
Figure 1. Low Tank Level Switch Removal.
2.
Remove two locknuts (Figure 1, Item 4), retainer clips (Figure 1, Item 5), and switch harness (Figure 1, Item
6) from two studs (Figure 1, Item 3). Discard locknuts.
3.
Remove two nuts (Figure 2, Item 11), lockwashers (Figure 2, Item 10), screws (Figure 2, Item 9), retaining
brackets (Figure 2, Item 7), and low level switch (Figure 2, Item 8) from bracket (Figure 2, Item 12). Discard