TM 5-3825-270-23&P
FIELD MAINTENANCE
DIAL AND MOUNTING PLATE REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
Parts Manual (WP 0220) Figure 4002
(WP 0225, Table 1, Item 12)
Equipment Condition
Materials/Parts
High tank level switch removed. (WP 0187)
Locknut (WP 0226, Table 1, Item 56) Qty: 2
Low tank level switch removed. (WP 0189)
REMOVAL
Remove two locknuts (Figure 1, Item 6), screws (Figure 1, Item 5), four washers (Figure 1, Item 4), mounting
plate (Figure 1, Item 3), and dial (Figure 1, Item 2) from tank (Figure 1, Item 1). Discard locknuts.
2
1
3
5, 6
4
Figure 1. Dial and Mounting Plate Removal.
END OF TASK
INSTALLATION
Install dial (Figure 2, Item 2) and mounting plate (Figure 2, Item 3) on tank (Figure 2, Item 1) with two screws
(Figure 2, Item 5), four washers (Figure 2, Item 4), and two locknuts (Figure 2, Item 6).