TM 5-3825-270-23&P
0178
REMOVAL - Continued
3
4
5
6
7
9
8
Figure 2. Water Pump Inlet Gauge and Hose Removal.
3.
Remove two nuts (Figure 2, Item 8), brackets (Figure 2, Item 7), and gauge (Figure 2, Item 9) from control
panel (Figure 2, Item 3).
NOTE
Perform Step (4) if fitting is damaged.
4.
Remove fitting (Figure 3, Item 4) from gauge (Figure 3, Item 9).
4
9
Figure 3. Water Pump Inlet Gauge and Hose Removal.
NOTE
Perform Step (5) if hose is damaged.
Note position of cushion clips prior to removal to ensure proper installation.