TM 5-3825-270-23&P
0177
INSTALLATION - Continued
1.
Install drain cock (Figure 2, Item 5) on water separator (Figure 2, Item 4) with preformed packing (Figure 2,
Item 6).
1
7
8
2, 3
5, 6
4
Figure 2. Fuel/Water Separator Installation.
2.
Install water separator (Figure 2, Item 4) on fuel filter cartridge (Figure 2, Item 2).
3.
Fill fuel filter cartridge (Figure 2, Item 2) with clean fuel.
WARNING
Prolonged contact with fuel may cause skin rash. Immediately wash skin and clothing
thoroughly and remove saturated clothing that comes in contact with fuel. Keep area well-
ventilated to keep fumes at a minimum. Failure to comply may result in injury or death to
personnel.
4.
Lightly lubricate gasket (Figure 2, Item 3) with clean fuel.
5.
Install fuel filter cartridge (Figure 2, Item 2) on filter head (Figure 2, Item 1) until it contacts, then tighten another
three-quarter turn by hand.
6.
Loosen air vent screw (Figure 2, Item 8) and allow air to escape.
