TM 5-3825-270-23&P
FIELD MAINTENANCE
HOSE HOOK WELDMENT REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
Parts Manual (WP 0220) Figure 4004
(WP 0225, Table 1, Item 12)
Equipment Condition
Materials/Parts
Fill hoses removed. (TM 5-3825-270-10)
Locknut (WP 0226, Table 1, Item 38) Qty: 2
REMOVAL
NOTE
All four hose hook weldments are removed the same way. Front corner hose hook weldment
shown.
Remove two locknuts (Figure 1, Item 1), screws (Figure 1, Item 2), and hose hook weldment (Figure 1, Item
3) from frame rail (Figure 1, Item 4). Discard locknuts.
3
1,2
4
Figure 1. Hose Hook Weldment Removal
END OF TASK
INSTALLATION
NOTE
All four hose hook weldments are installed the same way. Front corner hose hook weldment
shown.
