TM 5-3825-270-23&P
0149
REMOVAL - Continued
2.
Remove exhaust flex pipe (Figure 1, Item 1) and gasket (Figure 1, Item 2) from exhaust manifold (Figure 1,
Item 3). Discard gasket.
NOTE
Perform Step (3) if studs are damaged.
3.
Remove four studs (Figure 1, Item 6) from exhaust manifold (Figure 1, Item 3).
END OF TASK
INSTALLATION
NOTE
Perform Steps (1) and (2) if studs were removed.
1.
Apply anti seize to threads of four studs (Figure 2, Item 6).
6
4, 5
3
1, 2
Figure 2. Exhaust Flex Pipe Installation.
2.
Install four studs (Figure 2, Item 6) onto exhaust manifold (Figure 2, Item 3).
3.
Install exhaust flex pipe (Figure 2, Item 1) and gasket (Figure 2, Item 2) on exhaust manifold (Figure 2, Item
3) with four lockwashers (Figure 2, Item 5) and nuts (Figure 2, Item 4).
END OF TASK
FOLLOW-ON MAINTENANCE
Install engine compartment cover. (WP 0142)
END OF TASK
END OF WORK PACKAGE