TM 5-3825-270-23&P
0150
REMOVAL - Continued
4
7
8
3
8
7
6
6
3
5
Figure 2. Muffler and Band Clamp Removal.
3.
Remove two screws (Figure 2, Item 6), four bushings (Figure 2, Item 8), and muffler (Figure 2, Item 3) from
two band clamps (Figure 2, Item 7).
NOTE
Perform Step (4) if band clamp is damaged.
Left and right band clamps are removed the same way. Right side is shown.
4.
Remove two nuts (Figure 3, Item 9), screws (Figure 3, Item 10), and band clamp (Figure 3, Item 7) from engine
compartment cover (Figure 3, Item 11).
11
7
9, 10
Figure 3. Muffler and Band Clamp Removal.
END OF TASK
INSTALLATION
CAUTION
Do not over-tighten muffler clamps. Doing so will cause damage to pipes. Failure to comply
may cause damage to equipment.
