TM 5-3825-270-23&P
0150
INSTALLATION - Continued
NOTE
Perform Step (1) if brackets are damaged.
Left and Right band clamps are installed the same way. Right side is shown.
1.
Install band clamp (Figure 4, Item 7) on engine compartment cover (Figure 4, Item 11) with two screws (Figure
4, Item 10) and nuts (Figure 4, Item 9).
11
7
9, 10
Figure 4. Muffler and Band Clamp Installation.
2.
Position muffler (Figure 5, Item 3) in two band clamps (Figure 5, Item 7) and on flex pipe (Figure 5, Item 5).
4
7
8
3
8
7
6
6
3
5
Figure 5. Muffler and Band Clamp Installation.
3.
Secure band clamps (Figure 5, Item 7) on muffler (Figure 5, Item 3) with four bushings (Figure 5, Item 8) and
two screws (Figure 5, Item 6).
4.
Install exhaust clamp (Figure 5, Item 4) on muffler (Figure 5, Item 3) and flex pipe (Figure 5, Item 5).
5.