TM 5-3825-270-23&P
0136
REMOVAL - Continued
1
2
3
4
Figure 1. Rear Main Seal Removal.
2.
Install two screws (Figure 1, Item 3) in jack screw holes (Figure 1, Item 4) on rear main seal housing assembly
(Figure 1, Item 2).
3.
Tighten two screws (Figure 2, Item 3) in jack screw holes (Figure 2, Item 4) one half-turn at a time until rear
main seal housing assembly (Figure 2, Item 2) is removed from engine block (Figure 2, Item 1).
1
2
3, 4
Figure 2. Rear Main Seal Removal.
4.
Remove two screws (Figure 3, Item 3) from jack screw holes (Figure 3, Item 4) on rear main seal housing
assembly (Figure 3, Item 2).