TM 5-3825-270-23&P
FIELD MAINTENANCE
ENGINE FLYWHEEL REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
References
Tool Kit, General Mechanic's: Automotive
Parts Manual (WP 0220) Figure 4033
(WP 0225, Table 1, Item 12)
Wrench, Torque, 50-250 lb-ft (68-339 Nm), 1/2 in.
Equipment Condition
Drive (WP 0225, Table 1, Item 15)
Engine module removed. (WP 0128)
Flex element removed. (WP 0147)
Personnel Required
Construction Equipment Repairer 91L (2)
REMOVAL
WARNING
Flywheel weighs 75 lbs (34 kg). Do not attempt to lift or move or lift flywheel without the aid
of an assistant. Failure to comply may result in injury or death to personnel.
CAUTION
Do not use impact wrench on flywheel at anytime. Failure to comply may result in damage to
equipment.
NOTE
Flywheel bolt pattern is offset and can only be installed one way. Match mark flywheel and
flywheel housing prior to removal to ensure proper installation.
Remove seven screws (Figure 1, Item 1) and flywheel (Figure 1, Item 2) from crankshaft (Figure 1, Item 3).
0112-1