TM 5-3825-270-23&P
FIELD MAINTENANCE
INJECTION PUMP GEAR COVER PLATE REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
Materials/Parts (cont.)
Tool Kit, General Mechanic's: Automotive
Gasket (WP 0226, Table 1, Item 30) Qty: 2
(WP 0225, Table 1, Item 12)
Gasket (WP 0226, Table 1, Item 22) Qty: 1
Materials/Parts
References
Compound, Sealing, Loctite 242 (WP 0224, Table
Parts Manual (WP 0220) Figure 4029
1, Item 19, 20, 21, 22)
Equipment Condition
Cooling fan removed. (WP 0072)
REMOVAL
1.
Remove screw (Figure 1, Item 1) and gasket (Figure 1, Item 2) from oil line (Figure 1, Item 3) and fitting (Figure
1, Item 4). Discard gasket.
1, 2
3
4
Figure 1. Injection Pump Gear Cover Plate Removal.
2.
Remove screw (Figure 2, Item 6) and gasket (Figure 2, Item 7) from oil line (Figure 2, Item 3) and injection
pump gear cover plate (Figure 2, Item 5). Discard gasket.
