TM 5-3825-270-23&P
0111
INSTALLATION
WARNING
Prolonged contact with lubricating oil may cause skin rash. Immediately wash skin and
clothing thoroughly and remove saturated clothing that comes in contact with lubricating oil.
Keep area well-ventilated to keep fumes at a minimum. Failure to comply may result in injury
or death to personnel.
1.
Lightly lubricate crankshaft oil seal (Figure 2, Item 1) with clean oil.
1
OIL SEAL INSTALLER
2
3
Figure 2. Engine Crankshaft Front Seal Installation.
2.
Using seal installer and crankshaft pulley screw (Figure 2, Item 3), install crankshaft oil seal (Figure 2, Item 1)
into engine gear assembly case (Figure 2, Item 2).
3.
Remove crankshaft pulley screw (Figure 2, Item 3) and seal installer from crankshaft oil seal (Figure 2, Item
1) and engine gear assembly case (Figure 2, Item 2).
END OF TASK
FOLLOW-ON MAINTENANCE
Install crankshaft pulley. (WP 0110)
END OF TASK
END OF WORK PACKAGE
