TM 5-3825-270-23&P
0088
INSTALLATION - Continued
7
8
5
9
10
7
8
Figure 4. Main Control Panel Emergency Stop Pushbutton Installation.
NOTE
Install wires as noted prior to removal.
2.
Install two red wires (Figure 4, Item 7) with screws (Figure 4, Item 8) on main control panel emergency stop
pushbutton (Figure 4, Item 10).
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
3.
Apply sealant to the threads of six screws (Figure 5, Item 3).
5
6
3, 4
Figure 5. Main Control Panel Emergency Stop Pushbutton Installation.