TM 5-3825-270-23&P
FIELD MAINTENANCE
GRAVITY BAR WELDMENT STREAM LOW
INITIAL SETUP:
Tools and Special Tools
References (cont.)
Tool Kit, General Mechanic's: Automotive
Water Distributor Operator Manual (TM
(WP 0225, Table 1, Item 12)
5-3825-270-10)
Water Tank Replacement (WP 0195)
References
Gravity Bar Weldment Replacement (WP 0160)
Equipment Condition
Valve Handle Replacement (WP 0180)
Engine OFF. (TM 5-3825-270-10)
TROUBLESHOOTING PROCEDURE
GRAVITY BAR WELDMENT STREAM LOW
STEP 1
Is gravity bar weldment damaged?
Visually inspect gravity bar weldment for damage?
GRAVITY BAR
WELDMENT
Figure 1. Gravity Bar Weldment - Step 1.
CONDITION/INDICATION
Is gravity bar weldment damaged?
DECISION
No - Go to step 2. (Step 2 - Is water stream normal at closure cap C2 when valve V2 is opened?)
Yes - Replace gravity bar weldment. (WP 0160) Verify problem is solved. (Step 4 - Is gravity bar weldment stream
normal?)
STEP 2
Is water stream normal at closure cap C2 when valve V2 is opened?
1.
Remove closure cap C2. (TM 5-3825-270-10)
