TM 5-3820-276-10-1
0069
CAB PROTECTION KIT INSTALLATION - Continued
CAUTION
Use care when installing and removing side panels. Panels can damage mirrors. Failure to
comply may result in damage to equipment.
11.
With aid of an assistant, align cab protection kit left-side panel (Figure 5, Item 2) with cutouts over tabs
(Figure 5, Item 1) of cab protection kit front panel (Figure 5, Item 8), and slide cab protection kit left-side
panel (Figure 5, Item 2) down to lock into position.
2
3
4
1
8
7
5
5
6
WWDS00659
Figure 5.
Cab Protection Kit Left-Side Panel Installation.
NOTE
There are three lower lockpins but only two are shown.
12.
Install three lower lockpins (Figure 5, Item 5) to cab protection kit left-side panel (Figure 5, Item 2) and cab
protection kit mounting plate (Figure 5, Item 6).
13.
Install upper rear lockpin (Figure 5, Item 3) to cab protection kit left-side panel (Figure 5, Item 2) and bracket
(Figure 5, Item 4).
14.
Install forward lockpin (Figure 5, Item 7) to cab protection kit left-side panel (Figure 5, Item 2) and cab
protection kit front panel (Figure 5, Item 8).
15.
If required, push in left-side mirror.
