TM 5-3820-276-10-1
0019
18K MAIN WINCH (JIB) PENDANT OPERATION - Continued
7.
Push JIB BOOM switch (Figure 3, Item 3) to right to turn jib (Figure 3, Item 4) to right.
8.
Push JIB BOOM switch (Figure 3, Item 3) to left to turn jib (Figure 3, Item 4) to left.
9.
Pull HOIST UP/DOWN switch (Figure 3, Item 6) back to lower jib cable and hook (Figure 3, Item 5).
10.
Push HOIST UP/DOWN switch (Figure 3, Item 6) forward to raise jib cable and hook (Figure 3, Item 5).
11.
Pull POWER switch (Figure 3, Item 7) on pendant (Figure 3, Item 2) out to turn power off.
12.
Remove safety lanyard (Figure 4, Item 5) from eyebolt (Figure 4, Item 1).
1
2
3
4
5
WWDS01029
Figure 4.
Jib Pendant Disconnect.
13.
Disconnect pendant connector (Figure 4, Item 3) from WWDR connector (Figure 4, Item 2).
14.
Install cap (Figure 4, Item 4) on WWDR connector plug (Figure 4, Item 2).
END OF TASK
END OF WORK PACKAGE
02/13/2013root(opusualwp)wpno(O10006)