TM 10-4930-204-13
Figure 4-11.
Ignition Cable, Spark Plug, Ground Cable and Ignition
Switch, Removal and Installation.
(b) Inspect for cracks, breaks, signs of deteriora-
tion, and other damage.
Replace defective parts.
(c)
Inspect all threaded parts for damage.
Replace
defective parts.
(3) Adjustment.
Adjust spark plug gap and align electrodes
in accordance with instructions on figure 4-11.
(4) Installation.
NOTE
If removed, connect ground cable to ignition
switch.
Refer to figure 4-11 and install the
spark plug, ignition switch and ground cable.
f.
Magneto.
(1) Removal.
(a) Refer to paragraph 4-24c. and remove air shroud.
(b) Refer to figure 4-12 and remove magneto.
4-32