TM 10-4930-204-13
(d)
(e)
(f)
(g.)
Remove fuel shutoff valve.
Remove elbow from fuel strainer body.
Remove fuel strainer body from tank.
Release through bolts on tank straps and remove
straps and mounting bracket.
Figure 4-16.
Fuel Tank, Bracket, Fuel Strainer, and Shutoff Valve,
Removal and Installation.
(2) Cleaning and inspection.
Drycleaning solvent normally has a flash point
of either 100 or 138 degrees F, depending on the
type being used, but may flash at much lower tem-
peratures if contaminated with gasoline or jet
fuel.
Avoid repeated and prolonged skin contact.
Do not use near open flame or excessive heat.
4-36
