TM 10-4320-344-24
2.14.2 Air Cleaner Assembly Maintenance, Model 609-C.
(Continued)
b .
Assemble air cleaner (3) as follows:
(1) Install rain cap (29) on air cleaner (3).
(2) Insert filter element (28) in air cleaner (3). Install and tighten wing nut
assembly (27).
(3) Position air cleaner cover (26) on air cleaner (3) and secure with wing
nut (25).
2.14.2.7 Installation.
a .
Position restriction gauge bracket assembly (21) against pumping assembly (2)
and secure with two bolts (20), new lock washers (19), and nuts (18).
b .
Position air cleaner mounting bracket (17) in pumping assembly (2) and secure
with four bolts (16) and nuts (15).
c .
Position retaining clamps (9) on air cleaner mounting bracket (17) and secure
with two bolts (14), new lock washers (13), and nuts (12).
d.
Install air intake hose (11) on air cleaner (3) and secure with hose clamp
(10) .
Do not over tighten nuts on retaining clamps. Air cleaner body could be
damaged if nuts are too tight.
e .
Slide air cleaner (3) in retaining clamps (9) and secure with two bolts (8),
new lock washers (7), and nuts.
f .
Connect rubber hose (4) to rear of air cleaner (3) and restriction gauge (5).
g.
Close air cleaner access door (1) on pumping assembly (2).
2-98
