Air Cleaner Assembly Maintenance. Model 609-A. (Continued)

2.14.2 Air Cleaner Assembly Maintenance. Model 609-C.

TM-10-4320-344-24 Pump Assembly Water 600 GPM Model 609-A (NSN 4320-01-184-7494) Model 609-C (NSN 4320-01-261-6470) Model US636HCCD-1 Manual
Page Navigation
105

2.14.1 Air Cleaner Assembly Maintenance. Model 609-A. (Continued) c . Position two retaining clamps (6) on air cleaner mounting bracket (10) and secure with two bolts (9), new lock washers (8), and nuts (7). Do not over tighten nuts on mounting brackets. Air cleaner body could be damaged if nuts are too tight. d. Position air cleaner (3) in two mounting brackets (6) and secure with two bolts (5) and nuts (4). Make sure that there are no obstructions in preformed hose or air cleaner body prior to installation of rubber hose, otherwise damage to engine may r e s u l t. e . Slide two hose clamps (1) onto preformed hose (2) and install preformed hose (2) on air cleaner (3). Secure with two hose clamps (1). 2-94 TM 10-4320-344-24

Privacy Statement
Press Release
Contact