TM 10-4320-344-24
2.14 AIR INTAKE SYSTEM MAINTENANCE.
2.14.1 Air Cleaner Assembly Maintenance, Model 609-A.
This task covers:
2.14.1.1 Removal
2 .
14 . 1 . 5 R e p a ir
2.14.1.2 Disassembly
2.14.1.6 Assembly
2.14.1.3 Inspection
2.14.1.7 Installation
2 .
14 . 1 . 4 S e r v i ce
INITIAL SETUP
Tools
General Mechanic’s Automotive
Tool Kit, Appendix B, Section
III, Item 1
Hose Assembly, Nonmetallic,
Appendix B, Section III, Item 2
Goggles, Appendix B, Section III,
Item 2
Gun, Air Blow, Appendix B, Section
III, Item 2
Equipment Conditions
Pumping station shut down, TM
10-4320-344-10.
General Safety Instructions
To prevent rolling or sliding, do not work
on equipment that is not securely
s t a b i l i z e d .
Do not use cleaning solvent without proper
ventilation or clothing. Do not smoke or
use near open flame or excessive heat.
Material/Parts
Use compressed air only with proper
Gloves,
personal protective equipment.
Appendix C, Item 11
Rags, Appendix C, Item 20
Do not work on equipment without following
Solvent,
Dry Cleaning, Appendix C,
Item 26
standard shop safety precautions.
Lock Washers (TM 10-4320-344-24P)
2.14.1.1 Removal.
a .
Loosen two hose clamps (Figure 2-32, l) and remove preformed hose (2) and two
hose clamps (1) from air cleaner (3).
b.
Remove two nuts (4), bolts (5) and air cleaner (3) from mounting brackets (6).
c .
Remove two nuts (7), lock washers (8), bolts (9), and mounting brackets (6)
from air cleaner plate (10). Discard lock washers (8).
d .
Remove two nuts (11), lock washers (12), bolts (13), and air cleaner mounting
plate (10) from mounting bracket (14). Discard lock washers (12).
e.
Remove two nuts (15), lock washers (16), bolts (17), mounting bracket (14),
and mending plate (18). Discard lock washers (16).
2.14.1.2 Disassembly.
a.
Loosen screw (19) on end cap retaining clamp (20).
b.
Remove end cap retaining clamp (20) and air cleaner cup assembly (21) from air
cleaner (3) .
c .
Remove vacuum diaphragm (22) and air cleaner baffle (23) from air cleaner cup
assembly (21) .
d .
Remove wing nut (24) and filter element (25) from air cleaner (3).
e .
Remove air cleaner cap (26) and pressure indicator (27) from air cleaner (3).
2-91
