TM 10-4320-344-24
2.13.3 Muffler Maintenance. Model US636HCCD-1.
(Continued)
d.
e .
f .
g .
Do not over tighten nut on loop clamp. Damage to muffler body may result.
Install two bolts (14) into loop clamps (15) and secure with two new lock
washers (13) and nuts (12).
Position U-bolt (11) over manifold exhaust pipe (16) and exhaust muffler (8)
securing with clamp (10) and two nuts (9) .
Install exhaust elbow (4) on exhaust muffler (8) and secure with U-bolt (7),
clamp (6), and two nuts (5).
Ensure top of protective cap assembly is level with top of exhaust elbow.
Position protective cap assembly (3) on exhaust elbow (4) and secure with bolt
(2) and nut (1).
2-88
NOTE
