TM 10-4320-307-24
2-37
COLD STARTING AID A SSEMBLY REPLACE (CONT).
REMOVAL:
1.
Loosen thumbscrew (1) to release clamp (2) from ether
cylinder (3).
2.
Remove ether cylinder (3) by unscrewing from valve (4).
Remove gasket (5).
3.
Unscrew hose connector (6) from atomizer (7) and remove
atomizer (7) from air intake (8).
4.
Loosen screw (9) and nut (10) securing clamp (11).
5.
Loosen screw (12) securing cable (13) to valve (4).
6.
Loosen and remove nut (14) securing cable (13) to engine
enclosure (15).
7.
Remove cable (13) from engine enclosure (15).
8.
Remove two screws (16), nuts (17), and clamp (18)
securing valve (4) and remove valve.
2-137
