TM 10-4320-307-24
2-38
AIR CLEANER ASSEMBLY SERVICE/REPAIR/REPLACE.
This task covers:
a.
Service
b.
Removal
c.
Inspection
d.
Repair e.
Installation f.
Operational Check
INITIAL SETUP
Tools
Manual References
Tool kit, general mechanic's (Item 1, Appendix C)
TM 10-4320-307-10
Materials/Parts
General Safety Instructions
Soft cloth
Crocus abrasive cloth (Item 1, Appendix C)
Well ventilated area required for cleaning and
testing.
SERVICE:
NBC contaminated filters must be handled using
adequate precautions (FM 21-40) and must be
disposed of by trained personnel.
1.
Remove primary and secondary elements as follows:
a.
Loosen wing nut (1).
b.
Remove and discard primary element (2).
c.
Remove cotter pin and nut (3) from threaded rod.
d.
Remove and discard secondary element (4) as
required.
CAUTION
Do not operate engine without an air cleaner element.
Failure to comply with this instruction will result in
internal engine component damage.
e.
Wipe interior of body assembly (5) with clean, dry
cloth.
2-139
