TM 10-4320-307-24
2-37
COLD STARTING AID ASSEMBLY REPLACE (CONT).
INSTALLATION:
1.
Install adapter (1) into valve (2).
2.
Install valve (2) with clamp (3), two screws (4), and nuts (
5).
3.
Screw atomizer (6) into air intake (7).
4.
Install one hose connector (8) to atomizer and one to
adapter (1).
5.
Remove nut (9) from cable assembly (10) and insert cable
through engine enclosure (11). Secure with nut (9).
6.
Place cable clamp (12) over cable (10) and secure in place
with screws (13) and nuts (14).
7.
Attach end of cable (10) to valve (2) with screw (15).
8.
Screw cylinder (16) with gasket (17) into valve (2).
9.
Tighten thumbscrew (18) securing clamp (19) around
cylinder (16).
2-138
