TM 10-4320-307-24
2-38
AIR CLEANER ASSEMBLY SERVICE/REPAIR/REPLACE (CONT).
4.
Do not attempt to repair brittle, cracked, or deteriorated hose elbows, tubes, and adapters. Replace as necessary.
5.
Using abrasive cloth, remove rust or corrosion on air intake tubes. If damaged severely, replace.
6.
Replace restriction indicator if it is damaged.
INSTALLATION:
1.
Position air cleaner bracket (1) and two clamp halves (2) on engine assembly. Insert two screws (3 and 4), two
lockwashers (5), and two plain washers (6) and tighten.
2.
Position air cleaner (7) against inner clamp halves (2).
3.
Position outer clamp halves (8) against air cleaner and align holes.
4.
Insert screw (9), lockwasher (10), and nut (11) through clamp halves and tighten.
5.
Position clamp (12) on hose elbow (13). Install hose elbow (13) and tighten clamp.
6.
Position clamp (14) on air inlet tube (15). Install air inlet tube (15) on hose elbow (13) and tighten clamp.
7.
Install restriction indicator (16) into air inlet tube (15).
8.
Position clamp (17) on hose elbow (18).
9.
Position tube brace (19) against engine. Insert two screws (20) and lockwashers (21), and tighten.
10.
Position clamp (22) on air tube (23). Install air tube (23) on hose elbow (18) and tighten clamp.
11.
Position clamp (24) on hose elbow (25). Install hose elbow (25) on air tube (23) and tighten clamp.
12.
Position clamp (26) on air inlet tube (27). Install air inlet tube (27) on hose elbow (25) and tighten clamp.
13.
Position clamps (28 and 29) on hose elbow (30). Install hose elbow (30) to turbocharger inlet.
14.
Position air cleaner cap (31) on air cleaner (7) and tighten clamp (32).
15.
Install primary and secondary elements in accordance with step 2 of Service task.
2-142